Installing a split-system air conditioner is a difficult task that professionals should only attempt. The installation process can take several hours, and professionals will get things done in no time.
Consider several factors if you’re looking for a professional who can install your new split system aircon quickly and safely. This article provides a brief answer to the most anticipated question that every homeowner asks, “how to install split system?”.
Installing a split-system air conditioner is a difficult task
You need to ensure that all the necessary parts are present, and you have to wire them up correctly. The process takes time, so it’s best to call in professionals with experience installing these systems.
There are three main types of AC units: central (furnace) units, window units, and split systems. Central air conditioning is used in large buildings such as schools and hospitals because it can cool down entire floors simultaneously rather than just one or two rooms like window units.
These systems come with an external condenser unit that can be placed outside your property (usually near your home). Inside this unit will be an evaporator coil where refrigerant liquid passes through it when cooling down inside your building during the summer months.
This process heats a refrigerant gas called freon, which turns into a liquid when hot enough so that not too much heat escapes outwards towards the outside world where condensation occurs, causing water droplets on windows, etcetera, but when cooled down again inside the building then turns back into gas form.
Hence, no pressure buildup occurs within pipes, unlike other heating sources such as boilers, where some pressure builds up due to the stress point where the pipe bends downwards at the elbow joint, eventually leading to breakage.
Instead, there is no pressure buildup here because all gases flow freely through pipes while travelling between the compressor head located above the motor attached behind the furnace fan blade assembly.
Installation process
The installation process can take anywhere from an hour to a whole day. How long it will take to install your split system depends on a variety of factors, including:
- The type of split system you have purchased (they come in several different sizes) and where the aircon needs to be installed
- The condition of your house and whether or not any structural issues need to be fixed before installing the unit
Location
The time it takes to install your split system air conditioner will depend on several things, including the type of aircon, the condition of your house and your location in Australia.
Looking at the installation manual, you can get a rough estimate of how long it will take. Most split systems take 2-3 hours to install and connect to gas or electricity. It’s a good idea to have spare parts handy just in case something goes wrong during installation and have enough time allocated for running around getting those parts if needed!
Licensed electricians, who are experienced in performing aircon installations, can get the job done quicker than someone doing it as a DIY project.
In addition to knowing how to install split system quickly, licensed electricians also ensure that everything is safe when carrying out electrical work for you.
Wrapping up
The installation process can take anywhere from an hour to a whole day, but professionals will get the job done more quicker. If you’re looking for a professional who can install your new split system aircon quickly and safely, initiate the search process to find the right company and effective AC system.
